UTAH SPRINKLER

Request an Estimate 801-692-7315

Sprinklers, irrigation and a more thoughtfully watered yard.

Illustrated water-wise garden with native-style grasses and stone paths

Water-wise irrigation

Seasonal Sprinkler Care for Utah Weather

Review startup, summer adjustments and equipment-specific winter shutdown. Check your water provider’s notices and keep drainage separate from insulation.

Landscape illustration

Published by Utah Sprinkler Company.

The Utah Climate Challenge

Utah’s climate presents a unique challenge for homeowners and landscapers alike. With hot, dry summers and cold winters, your sprinkler system needs to be in prime condition to withstand the extremes. Neglecting maintenance can lead to costly repairs and water wastage.

Spring Maintenance: A Fresh Start

As the snow melts and spring arrives, it’s time to give your sprinkler system a fresh start. Here are the essential steps for spring maintenance:

  1. Visual Inspection: Start by visually inspecting your entire system. Look for any visible leaks, damaged pipes, or clogged nozzles. If you spot any issues, address them promptly.
  2. Test Zones: Run each zone of your sprinkler system to ensure that all areas are receiving adequate water. Check for any uneven coverage.
  3. Clean Nozzles: Remove and clean the nozzles on your sprinkler heads to ensure proper water distribution. This step can significantly improve the efficiency of your system.
  4. Adjust Sprinkler Heads: Make sure that your sprinkler heads are adjusted correctly. They should be level and not blocked by overgrown vegetation.
  5. Program Smart Controllers: If you have a smart sprinkler system, update the settings based on the season. Adjust the program to actual soil moisture, plant needs, current weather and provider restrictions rather than assuming one fixed seasonal setting.
  6. Check for Leaks: Inspect your main water line for any leaks. Even a small leak can lead to substantial water wastage over time.

Summer Maintenance: Beating the Heat

Summer in Utah can be scorching, and your landscape will need extra care. Here’s what you should do during the hottest months:

  1. Monitor Moisture Levels: Keep an eye on the moisture levels in your soil. Deep watering less frequently is better than shallow, frequent watering. This encourages your plants to develop deep roots.
  2. Adjust Watering Schedule: If your smart controller doesn’t already do it, consider adjusting your watering schedule to avoid the hottest parts of the day. Early morning is the best time to water.
  3. Check for Evaporation: High temperatures can lead to water evaporation. Ensure your sprinklers are effectively reaching your plants and not wasting water through evaporation.

Fall Maintenance: Preparing for Winter

Use the following planning checklist alongside the installed equipment instructions and current provider notices. The correct shutdown method depends on the actual system:

  1. Shutdown and private-supply isolation: Start with the installed equipment’s shutdown procedure. Identify and isolate the private irrigation supply and complete applicable depressurization before opening components or attempting drainage. Include pump and backflow instructions; leave provider-owned controls to the provider.
  2. Equipment-specific drainage: Use the appropriate manual, automatic-drain or qualified blowout procedure for the installed system. Do not assume one method or a universal compressor setting applies to every component. Get qualified help if the procedure is uncertain.
  3. Finish the required protection: Complete the specified shutdown for exposed components, pumps and backflow devices. Covers or insulation do not drain water-filled equipment and do not replace the required procedure.

Year-Round Vigilance

While seasonal maintenance is crucial, it’s also important to keep an eye on your sprinkler system throughout the year. Look for signs of trouble, such as reduced water pressure, unusual sounds, or areas of your lawn that aren’t getting enough water.

Plan the next step for your property.

Compare the work involved, or describe your project when requesting an estimate.

Winterization & blowouts
Request an estimate

Further reading

Let’s make a better plan for your yard.

Tell us what is working, what is not and what you have in mind.

Request an Estimate